Current position: Home → News and information → Exchange of experience

Fire and explosion prevention

日期： 2018-11-19

浏览次数: 26

1. The common electrical equipment can not be used in explosion-proof places. Such as family use fans, flashlights, electric furnace, etc.

2. The place for fire and explosion prevention maintenance, temporary power supply cord, when according to the Ming, welding, must submit an application to the corporate security department and can be carried out only after it has been deal with concerned formalities.

3. To operate in place for fire and explosion prevention, to prevent sparks should be equipped with tools, easy to produce sparks of iron tools is strictly prohibited.

4. The operator of the blast site, and other personnel to enter the place, not easy to produce static chemical fiber cloth dress and easy to produce sparks with leather shoes.

5. All hanging "no fireworks", "no fire", should be strictly observed.

6. If meet burning combustible gas leakage, don't put the fire out immediately, and shall be immediately shut down the leaking pipe valves, and then to fire. Otherwise, although put the fire out, gas leak continuously, if reach explosion concentration, again meet fire, could cause an explosion.

火灾及爆炸事故预防

last：High work accident preventionnext：no

Related to recommend

High work accident prevention

点击次数: 43

2018 - 11 - 19

1. Whoever engages in operation for more than 2 meters and belong to high homework, homework personnel, to participate in high for a check-up every year.2. In the steep slope hazards such as edge, must furnish the relief valve or guardrails, otherwise, homework personnel should use your seat belt.3. In the welding operation or other sources such as sparks, melting area should be used with heat insulation tube seat belt or a safety rope.4. High homework personnel in the operation process, should check your seat belt is not strong.
Fire and explosion prevention

点击次数: 26

2018 - 11 - 19

1. The common electrical equipment can not be used in explosion-proof places. Such as family use fans, flashlights, electric furnace, etc.2. The place for fire and explosion prevention maintenance, temporary power supply cord, when according to the Ming, welding, must submit an application to the corporate security department and can be carried out only after it has been deal with concerned formalities.3. To operate in place for fire and explosion prevention, to prevent sparks should be equipped with tools, easy to produce sparks of iron tools is strictly prohibited.4. The operator of the blast site, and other personnel to enter the place, not easy to produce static chemical fiber cloth dress and easy to produce sparks with leather shoes.5. All hanging "no fireworks", "no fi...